Features
- Robust, Rugged design and noncorrosive (not affected by temperature, humidity, pressure or dust)
- Simple Installation, Easy configuration and quick installation reduces project costs and start-up times
- Maintenance-free, no moving parts, and virtually no calibration
- Accurate, Bi-directional readings, cross-sectional velocity averaging measurements, predominant to single point measurement
- Reliable, Designed to perform in extreme noise and hi-velocity applications
- Versatile, Preset with multiple configuration and application options
- Digital signal processing, Modbus RTU and analog 4-20 mA output
- Ultrasonic time of flight technology in real-time with continuous monitoring
- Advance detection of false readings and sensor obstructions caused by moving vehicles and personnel
Specifications
Specifications
| Process: Measuring Units |
Airflow: m/s, ft/min. Volumetric Flow: m3/s, cfm, kcfm Optional with ClimaTRAX Probe: Temperature (°C, °F), Pressure (psi, mbar, kpal, in/H2O), Humidity (RH%) & 12 more parameters |
|---|---|
| Ranges: Drift |
Measuring Range: 0 to 40 m/s (no practical limit) Accuracy: 2% F/S or ± 0.05 m/s (whichever is greater) Face to Face Distance: 8 ft min, 60 ft max |
| Ranges: Fan |
Measuring Range: 0 to 40 m/s (no practical limit) Accuracy: 2% F/S or ± 0.05 m/s (whichever is greater) Face to Face Distance: 8 ft min, 30 ft max |
| Ranges: IDM |
Measuring Range: 0 to 40 m/s (no practical limit) Accuracy: 2% F/S or ± 0.05 m/s (whichever is greater) Face to Face Distance: 2 ft min, 8 ft max |
| Electrical Ratings |
Power In: 24 VDC, 110-240 VAC Power Consumption: <100 watts Impedance: 700 Ω Max loop resistance |
| Communication Interface |
Serial: Modbus RTU RS485 Analog Outputs: (1) 4-20 mA Optional: Modbus TCP with CommTRAX, Ethernet IP* |
| Physical |
Enclosure: Noncorrosive IP 66 NEMA 4X with lock hinges Operating Humidity: 0% to 90% RH Operating Temperature: -40°C to 70°C |
Sensor Specs
Drift Sensor
Used for ramps, drifts, travel ways, shafts, and raises
- Stainless steel/polycarbonate
- Pan & tilt sensor mounts
- Built-in laser pointer for easy sensor alignment and installation
- Built-in sensor status heartbeat LED
Fan Sensor
Used for surface intake and exhaust fans
Stainless steel mounting plate designed for specific fan application with a ball and socket sensor assembly for easy alignment and quick installation.
IDM Sensor
Used for auxiliary ventilation for fans and ducts
- Pre-wired cable assembly kit
- Modular design to meet various application demands
- Ball and socket design for easy alignment and quick installation with square or round ducting
Long Range Sensor
Used for long-range sensor applications, road tunnels, salt mines, room, and pillar
Designed to accurately measure airflow over long distance runs, wide tunnels, and large cross-sectional measuring areas.
Accessories
CommTrax
I/O Trax 1 & 2
Hand-held programmer
Cable set
Stainless steel mounting plate
