Sensepoint XCD Gas Detection Transmitter

Sensepoint XCD Toxic, O2 and Flammable Transmitter

Sensepoint XCD now has remote monitoring capabilities for its toxic and Oxygen sensors. Its remote capability is designed to offer excellent flexibility of use and is an ideal solution for hard-to-reach locations or areas where the transmitter needs to be separate from the sensor. With remote toxic and Oxygen sensor mounting of up to 30m away from the transmitter. Sensepoint XCD provides a robust monitoring solution even in challenging environments where detection is difficult, including applications where the point of detection is in an area that is not easily accessible or where the detector would not be visible, like in high or low level concealed areas or outside a room being monitored.

A tri-color backlit LCD clearly indicates the unit's status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm.

All detectors are supplied pre-configured and include two programmable alarm relays, one programmable fault relay as well as an industry standard 4-20mA output (sink or source selectable) and MODBUS communication. The scale, range, relay operation, alarm set point and electronic tag number of the detector can be adjusted using the transmitter's LCD and non-intrusive magnetic switches. Outputs are automatically inhibited during adjustment, thereby reducing the risk of false alarm at the control panel during maintenance.

Sensor Range

H₂S,
CO,
O₂,
LEL,
NO₂,
H2,
CO2.

Features
Specifications
Sensor Specs
Accessories
PDF Download

Features

Flammable (catalytic or infrared), toxic and oxygen versions available
Serves new/retrofit, indoor/outdoor applications
Stainless steel or aluminum explosion-proof housing options
IP66 as standard
All-in-one gas monitoring solution
Proven SurecellTM electrochemical sensors
Global approvals

Specifications

Specifications

Use	3 wire, 4-20mA and RS485 MODBUS output fixed point detector with in-built alarm and fault relays for the protection of personnel and plant from flammable, toxic and Oxygen hazards. Incorporates a transmitter with local display and fully configurable via non-intrusive magnetic switch interface
Input Voltage Range	12 to 32VDC (24VDC nominal)
Max Power Consumption	Maximum power consumption is dependent on the type of gas sensor being used. Electrochemical cells = 3.7W, IR = 3.7W and catalytic = 4.9W. Maximum inrush current = 800mA at 24VDC
Current Output Relays	Sink or source Relays 3 x 5A@250VAC. Selectable normally open or normally closed (switch) and energized/de-energised (programmable) Alarm relays default normally open/de-energized. Fault relay default normally pen/energized
Communication	RS485, MODBUS RTU
Material	Housing: Epoxy painted aluminium alloy ADC12 or 316 stainless steel Sensor: 316 stainless steel
Weight (approx)	Aluminium Alloy LM25: 4.4lbs 316 Stainless Steel: 11lbs
Mounting	Integral mounting plate with 4 x mounting holes suitable for M8 bolts. Optional pipe mounting kit for horizontal or vertical pipe Ø1.5 to 3" (2" nominal)
Cable Entries	UL\cUL versions: 2 x ¾”NPT conduit entries. Suitable blanking plug supplied for use if only 1 entry used. Seal to maintain IP rating; ATEX/IECEx versions: 2 x M20 cable entries
IP Rating	IP66 in accordance with EN60529:1992
Certified Temperature Range	-40ºC to +65ºC

Sensor Specs

Sensor Specifications

Gas	Range
O₂	25% Vol.
H₂S	10-100ppm
CO	100-1,000ppm
H₂	1,000ppm
Flammable 1 to 8 (LEL)	20-100%LEL
Methane (LEL)	20-100%LEL
Propane (LEL)	20-100%LEL
CO₂	2% vol

Accessories

Sensepoint XCD Duct mounting kit

Part Number: SPXCDDMK

Sensepoint XCD Mounting bracket

Part Number: SPXCDMTBR

Sensepoint XCD Sunshade / Deluge Protection

Part Number: SPXCDSDP

PDF Download

Manual

Sensepoint XCD Manual

Specifications

Certification

XCD IEC Ex BAS 08 0104 X 005

Enquire about Sensepoint XCD Toxic, O2 and Flammable Transmitter