Features
- Maximizes the safety and efficiency of your mix of fixed gas detectors
- Provides reliable gas leak detection in a wide range of applications and working environments
- Minimizes the risks of false alarms
- Enables quicker, easier installation
- Minimizes cost of ownership and saves time
- Increases ease of use with advanced set-up and test tools.
- No False Alarms
- Wide Zone Coverage
- Complements Existing Gas Detectors
- No Moving Parts
- Simple Installation and Alignment
- Bluetooth Compatibility
- Instrument Status at a Glance
- Full Operational Logs
- Fast Commissioning
Specifications
Specifications
| Sensor Type |
Tuned piezoelectric transducer |
|---|---|
| Detection Method |
Sound Pressure Level at the sensor |
| Frequency Range |
18 kHz to 70 kHz |
| Dynamic Range |
40 dB to 140 dB |
| Detector Range |
Typically 20 m on-axis radius (background noise dependant) |
| Recommended |
Alarm Setting 6 dB above the background noise |
| Cone of Detection |
+/- 90 degrees (Standard Mode), +/- 20 degrees (Focus Mode); solid angle from on-axis to 6 dB down |
| Speed of Response |
Sensor response 1 s; Programmable Verification time from 0s to 600 s |
| Electronic Self Test |
Built in test diagnostics |
| Storage Temperature |
-55° C to +75° C |
| Operating Temperature |
-55° C to +75° C |
| Operating Humidity |
0 to 100% RH |
| Warm-up Time |
Less than 5 minutes (operational) |
| Power Supply & Maximum Power Consumption |
24Vdc nominal (18 Vdc to 32 Vdc); 167mA at 24 Vdc (3 W), 4W for ambient operating temperature -30°C and above, 15 W for ambient operating temperature below -30°C (heater is active) |
| Cable entries |
2 x M25 or 2 x 3/4” NPT |
| Outputs |
Relays (1 fault, 2 Alarm) – contact rating 2 A (resistive load). Fully configurable 4 – 20 mA isolated, sink or source (maximum loop resistance 600 ohms); Fault < 1 mA, Warning 3 mA, Over-range 22 mA. Linear configurable output corresponding to Sound Pressure Level. |
| Analog Thresholds |
0 mA Fault, 2 mA Inhibit, 4-20 mA Normal Operation |
| Digital Communications |
|
| Event Logs |
Time stamped |
| Visual Indication |
High Visibility light ring; green/yellow/red/blue multi-color to indicate detector status. Green (normal) indication can be disabled via Searchzone Sonik App. |
| Dimensions |
Instrument: 103 dia x 235 x 176 mm Standard Mount: 165 x 165 x 127 mm Large Mount: 210 x 210 x 127 mm |
| Enclosure Material |
Stainless Steel 316L; with paint finish |
| Standard Adjustable Mounting |
Bracket Stainless Steel. Graduated to enable Searchzone Sonik to be simply mounted and aimed in 5 degree steps, weight 2.9 kg (6.4 lbs) |
| Large Adjustable Mounting Bracket |
Stainless Steel. Graduated to enable Searchzone SonikTM to be simply mounted put on one line and aimed in 5 degree steps, weight 3.5 kg (7.7 lbs) |
| Interfaces |
Bluetooth® non-intrusive connection to suitable mobile device running the SearchzoneTM Sonik mobile app. Range up to 20 m (mobile device dependant). |
| Vibration |
2 - 60 Hz, maximum peak to peak amplitude 1 mm |
| Ingress Protection (IP) Rating |
IP 66 / 67 (Type 4X), according to NEMA 250 |
| Warranty Period |
36 months from date of shipment |
Accessories
Adjustable Mounting Bracket
Sunshade
Hand-Held Tester
